1.Effective cutting range: width 2200mm; Maximum cutting height: 9cm after vacuum compression;

2.Maximum knife frequency: 6000 rpm (revolutions per minute); Maximum cutting speed: 120 meters per minute;

3.Equipped with two fabric spreading machines, top and bottom rails, a matching air compressor (22kW, 1 cubic meter air tank and dryer), and other equipment to meet the production needs of the main machine. The supporting computer and software can recognize common marker plan drawing file formats, and no additional usage fees or service fees shall be charged within the product life cycle;

4.The cutting bed control software has a secondary editing function;

5.Equipped with a "cut-while-moving" module. During the window changing process, it enables continuous cutting in both X and Y directions without interruption, realizing the function of cutting while feeding;

6.Adopts soft motion control system technology for efficiency data, ensuring more stable and fast operation;

7.Configured with air-blowing cooling, cutter head cooling, liquid cooling, rapid knife sharpening, automatic cutter head lifting, and lockable cutter head;

8.Equipped with intelligent knife correction technology. Sensors are installed inside the cutter head to detect the deviation signal of the cutting knife, correct the blade angle in real time, and the sensitivity is adjustable to ensure the cutting precision;

9.Equipped with a double-drill center pin type punching device, which can automatically remove waste materials;

10.Requirements for the fabric spreading machine: fabric spreading width 2 meters, length 18 meters; single-layer fabric spreading height 200mm; maximum traveling speed 110 meters per minute; maximum weight of fabric roll 50kg;

11.The bristle bed body has an automatic cleaning function to extend the service life of the bristle tiles;

12.Adopts an integrated bed body design;

13.The software can monitor the number of knife sharpening times and calculate the actual cutting knife width. When the cutting knife width is lower than the set value, it has a function to remind the replacement of the knife;

14.Guide rails: The X and Y transmission guide rails of the cutting head adopt imported accessories;

15.Air pressure: ≥6 kgf/cm² (kilograms-force per square centimeter);

16.Compressed air supply: >70 L/min (liters per minute);

17.Maximum humidity: 70% without condensation;

18.Chinese-language operation with a user-friendly interface for easy operation. The control system has a user login authority grading function, which facilitates the setting of operators' authorities (personnel with different authorities can perform different levels of operation and maintenance on the equipment);